Wall-mounted TV cord cover checklist
For routing visible low-voltage television cords in a surface-mounted cord cover. It does not involve moving electrical outlets inside a wall.
What to get
Paintable cable raceway kit
1 kit
Raceway corner connectors
1 pack
Cable entry and exit covers
2
Cable clips
1 pack
Hook-and-loop cable ties
1 pack
Measuring tape
1
Level
1
Pencil
1
Painter's tape
1 roll
Fine-tooth hacksaw or raceway cutting tool
1
Sandpaper
2 sheets
Rubbing alcohol
1 bottle
Microfiber cloth
1
Scissors
1
Who this list is for
Visible low-voltage television cords can be routed neatly with a surface-mounted cord cover. This checklist is for a wall-mounted TV setup and does not include moving electrical outlets inside the wall.
How to use this list
Plan the route from the TV to the cord destination with the measuring tape, level, pencil, and painter's tape. Clean the mounting area with rubbing alcohol and a microfiber cloth. Cut the paintable cable raceway with a fine-tooth hacksaw or raceway cutting tool, then smooth cut edges with sandpaper. Use raceway corner connectors, cable entry and exit covers, cable clips, and hook-and-loop cable ties to organize cords before closing the raceway.
Common mistakes
Do not route cords across a path where the raceway will be bumped or pulled loose. Avoid measuring only the straight sections and forgetting corners or entry covers. Do not force cords into an overfilled raceway. This list is for low-voltage television cords only; electrical outlet work belongs with a qualified electrician.
What is on this list
The list includes a paintable cable raceway kit, corner connectors, two cable entry and exit covers, cable clips, and hook-and-loop cable ties. It also includes measuring, marking, cutting, sanding, cleaning, and trimming supplies. Cross off items already in your tool drawer.
When you are done
Check that the raceway is straight, fully closed, and not pinching any cord. Confirm the TV cords have enough slack at both ends. Save offcuts and extra connectors for a later adjustment or added low-voltage cable.
FAQ
Who is "Wall-mounted TV cord cover checklist" for?
Visible low-voltage television cords can be routed neatly with a surface-mounted cord cover. This checklist is for a wall-mounted TV setup and does not include moving electrical outlets inside the wall.
How should I use "Wall-mounted TV cord cover checklist"?
Plan the route from the TV to the cord destination with the measuring tape, level, pencil, and painter's tape. Clean the mounting area with rubbing alcohol and a microfiber cloth. Cut the paintable cable raceway with a fine-tooth hacksaw or raceway cutting tool, then smooth cut edges with sandpaper. Use raceway corner connectors, cable entry and exit covers…
What should I skip or avoid with "Wall-mounted TV cord cover checklist"?
Do not route cords across a path where the raceway will be bumped or pulled loose. Avoid measuring only the straight sections and forgetting corners or entry covers. Do not force cords into an overfilled raceway. This list is for low-voltage television cords only; electrical outlet work belongs with a qualified electrician.
What is on the "Wall-mounted TV cord cover checklist" list?
The list includes a paintable cable raceway kit, corner connectors, two cable entry and exit covers, cable clips, and hook-and-loop cable ties. It also includes measuring, marking, cutting, sanding, cleaning, and trimming supplies. Cross off items already in your tool drawer.
What should I do when I am done?
Check that the raceway is straight, fully closed, and not pinching any cord. Confirm the TV cords have enough slack at both ends. Save offcuts and extra connectors for a later adjustment or added low-voltage cable.
Related lists
For general planning only. Valedo does not guarantee this list’s accuracy, completeness, or suitability. Verify information before relying on it. Not a substitute for professional advice or safety training.